-183x183.gif "EDCG")
Ethyl alcohol-based solution used for developing pad printing plates, both manually and in automatic developing equipment...
0.00 lei
Ex Tax:0.00 lei
Brand: ITW Morlock GmbH
Polished and sometimes hardened steel strips are used. The doctor blades are usually from 0.2mm (for photopolymer) to 1.0mm thick. The doctor blades can be machined at different angles: sharp, beveled on one side, on two sides or with a blade. Very good results are obtained with knives sharpened on ..
0.00 lei
Ex Tax:0.00 lei
The surface tension and energy of the surfaces of the materials to be printed determine the adhesion of the deposited ink layer.High values of surface tension (38-40mN/m) and energy will determine good adhesion, while lower values will determine poor adhesion.Testing the surface is done using a ..
0.00 lei
Ex Tax:0.00 lei
Brand: Kent–Stuttgart
Accessory used for developing clichés (in water or alcohol-based solution). The textile material that comes into contact with the cliché during the development process can be replaced when it becomes worn (plush developing pad). Dimension - 14x20cm...
0.00 lei
Ex Tax:0.00 lei
Brand: ITW Morlock GmbH
Raster film is a special film made of dots. The number of raster dots/cm2 and the exposure value expressed in % are the parameters of the raster film.The choice of raster film is made depending on the fineness of the details of the image to be printed as follows:- for fine lines, a 120/86% raster fi..
0.00 lei
Ex Tax:0.00 lei
In the case of closed-system pad printing machines, the scraping of the ink film from the surface of the pad printing mold is done using a ring mounted on the machine cup.The rings can be:- ceramic or metal- round or oval shaped- of different sizes depending on the surface to be printed- of differen..
0.00 lei
Ex Tax:0.00 lei
Brand: ITW Morlock GmbH
After prolonged use, it is recommended that the pad be treated with silicone oil for regeneration...
0.00 lei
Ex Tax:0.00 lei
New
Brand: ITW Morlock GmbH
Simple device, with which you can establish an optimal working viscosity for pad printing inks...
0.00 lei
Ex Tax:0.00 lei
Showing 1 to 8 of 8 (1 Pages)